|
|
Total Number of Subscribers: 426 |
|
|
|
||
|
|
||
|
Date: 29 April 2008 |
Compiled by Mr. M. Sathya Kumar |
|
|
|
Internal Audit of an SME (Engineering Unit
)
Assurance and Consulting Role Background
: The Managing Director of an engineering unit based in Greater
Noida (UP) has been in touch with a partner of a Chartered Accountant firm
since they first met a few months back at a conference organised by a Chamber
of Commerce in Mumbai. As the Managing Director (MD) was progressive in his
views, the CA suggested the institution of ‘internal
audit’ at the manufacturing unit. The Managing Director felt that since the
turnover is only Rs.80 crores and he, along with his family members (brothers
and uncles), controls most of the operations like procurement, finance,
manufacturing, etc., the internal audit would not yield any significant
benefit. The CA suggested a plan of internal audit to be a half-yearly
feature with a fortnight being spent by a Chartered Accountant and a
semi-qualified staff member, and he himself would be available for four days
each quarter. The internal audit would cover ‘process
review’
and suggest improvements. In addition, it was proposed that each area like rocurement,
production, marketing, etc. (areas to be decided after discussing and
studying the functions at the unit during the first review) be rated on a
scale of 1 to 10 and scores given on basis of audit findings. This would
signify areas of risk and poor management. As these scales are subjective, it
would be arrived at after discussing with the auditee in each area.
Cumulatively score would be given for the unit every half year. Hence, the
internal audit every half year would be akin to the annual health check-up of
a person. This idea and approach appealed to the Managing Director and he
accepted the proposal to carry out the first internal audit on trial basis. Methodology : Based on the above background, the partner-incharge of the firm
had a meeting with his audit manager to chalk out a plan to achieve the above
objectives and ensure that the internal audit service is really beneficial to
the SME. The success of the first half-yearly internal audit would demonstrate
the value-added role of internal audit to the MD of the engineering unit. In the first half year it was decided that the team would focus
on all major areas like Procurement, Stores including Inventory, Production,
Despatches, Production, Marketing, Human Resources, and Finance &
Accounts. Throughout the internal audit, it was agreed amongst the
internal audit team members, that education and awareness for
institutionalised systems and procedures including importance of decisions to
be taken on scientific basis rather than ‘rule of thumb’ would be emphasised. This is particularly relevant in SME where the
decisions are mainly taken on ‘rule-of-thumb’
basis. Based on the internal audit carried out, given below are a few
of the observations : Procurement and Stores : ·
Raw materials which formed 45% of the cost of sales were
purchased personally by the MD. It was observed that he had strict control
over cost. However, since the unit was cash surplus and the interest rate on
cash credit was only 9%, it was pointed out that the unit should make payment
to raw material creditors immediately on receipt and avail of cash discount
of 2% per month — that is — 4% for two months, the
period of credit availed of by the unit. This amounted to savings of 1% to
1.5% over the cost of purchases, which was a substantial saving in cost. ·
There was lax control over consumables, as the family
members neglected this area assuming it to be of little value compared to
other activities. This had led to weak control over this area. It was noticed
that bills for small consumables were booked twice and paid out twice. Items
which were to be got as free supply along with bigger equipment/s were paid
out, as it was not marked out properly in stores. ·
In case of ‘Open Orders’,
the rate was confirmed at some point of time; however, there was no periodical
review of the rates stated in the Orders. Total purchases under such orders
amounted to Rs.8 lacs for the six months ended September 30th, 2007.
·
High-value consumable like diesel was being purchased
from a dealer rather than directly from oil company. Purchase of diesel
directly from the oil company was suggested and implemented, resulting in
some savings in cost. This also reduced the chances of buying adulterated
diesel. Marketing : Marketing was being handled by two uncles and two brothers of
the MD. They had divided the clients and interacted with the allocated
clients without any co-ordination amongst themselves. This led to some
confusion over supplies to customers, as there was no single person
responsible for marketing. ·
Almost all orders procured were supplied late and this
led to levy of liquidated damages costing lacs of rupees every year. There
was total absence of planning for avoiding late deliveries. More than the
levy of liquidated damages, this was affecting the reputation of the unit. ·
Further, since the economy was passing through a upswing,
there was no dearth of orders, but due to absence of proper analysis, the
unit did not concentrate on high-contribution orders. They felt that they
were doing a great job, but a three-month analysis proved otherwise. The unit’s market share of high-contribution items was low when compared
to other competitors. The high contribution orders went to their competitors.
The internal auditor recommended corrective action, which when implemented,
resulted in better co-ordination and the compensation for late deliveries was
substantially reduced. This step improved both profitability and client
relationship. Finance & Accounts : ·
There were idle funds in bank accounts and at the same
time there was cash credit limit being utilised at 9%. Idle funds needed to
be transferred to cash credit account. Further as a resultof review of bank
accounts undertaken, dormant bank accounts were identified and closed. ·
Credit rating by Crisil was undertaken and a triple-A
rating ensured that the bank interest on cash credit was reduced by half a
percent by the bank. The credit rating was also used to assure the vendors
and customers about the excellent financial position of the unit. There were numerous observations in various areas and each area
was rated from 1 to 10 rating scale. Overall, the unit got 5 and it was
agreed that all observations would be acted upon for improvement. It was also
agreed that with improvements and another cycle of internal audit after six
months, the unit would try to get better rating. Also, the observations were divided into measurable cost savings
and process improvements, and responsibility being given to heads of
departments for the same. The observations would also be reviewed internally
in the unit’s monthly management meeting of
the heads
of departments). Conclusion : The Managing Director appreciated the efforts of the internal
audit team and desired that the internal audit be carried out on a quarterly
basis. He specially appreciated the ‘understanding
of the business’ by the partner of
the C.A. firm and his suggestions for ‘process
improvements’ and ‘cost savings’. The Managing Director also arranged for the
partner to speak at the local industry forum for SMEs, where his company’s case study was presented to other SMEs. This led the internal
auditing function to be elevated to providing ‘business solutions’. Coutesy:
Article by Deepjee Singhal , Manish Pipalia Chartered Accountants |
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
Rewards waiting for feedback at |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
Disclaimer: We believe that the information contained in this e-zine is true. If you do not wish to receive Smart Trainee please click here. |
|
|
|
||
|
|
|
|
|
|
Click here to contact us, if you are unable to view the content properly |
|
|
|
|
|
